LIFTERS (Max Load 150kg.)
Lift / Lower With Precision.
Without proper lifting equipment, installers often resort to manually lifting to move heavy units into position. This creates a significant safety risk but also leads to difficult alignment and job inefficiencies. Our LIFTERS are specifically designed for precise lifting, lowering, leveling, or holding of heavy or awkward loads, including heat pumps, RSJs, K3 Radiators, thermal storage units and more. Engineered with safety in mind, the slow-drop lever allows you to lower your load by 2mm increments, ensuring accuracy when positioning the load onto the Mover.
RAMPS (Max Load 200kg.)
Bridge The Gap - Steps, Gullies and Vans.
We understand that moving heavy and cumbersome equipment, such as heat pumps, or navigating challenges like garden steps, gullies or drain trenches can be difficult. Our Telescopic RAMPS are designed to help you overcome these obstacles. They expand from 1m to 2.4m, making it easier to load and unload heavy equipment from your van and to navigate various site challenges. For safety, especially when moving items that could "run away," we recommend using two operators: one to steer the Mover and another to hold it back.
STAY (Max Load 400kg.)
Stay-Put With Our Backstop
Moving loads with flat surfaces like oil boilers or PV batteries up or down stairs or steep slopes can cause the load to slip on the Mover if not strapped into place. The STAY is an attachment for any of our Movers - it bolts to the Move baseboard and provides a backstop to support the load during a move.
ROLLER (Max Load 400kg.)
Just Roll It On & Off
Thermal storage units are heavy, tall and nothing to grip on to, just like water cylinders, large water tanks or PV batteries. This form factor makes them extremely challenging to handle or balance safely on standard lifting equipment. Their relatively high centre of gravity increases the risk of tipping if not handled with care. The ROLLER is an attachment for any Mover, designed to roll the load off a pallet onto the Mover. Use the Mover to move the load to its final location, collapse the front foot and roll the unit into position.